en 1149 2 footwear testing equipment

EN ISO 20344 Footwear Testing Equipment Sole Flexing Tester Use: Install the sole test piece on the EN sole flexing testing machine, so that the incision falls just above the center of the rotating shaft of the EN sole flexing testing machine, and drive the test piece on the shaft through the machine to stretch flexing (90±2)º .After a certain number of tests, measure the length of the incision of the test...

EN 1149-2 Electrostatic Device Footwear Test Tester Textile Resistance Tester Test standard EN 1149-1and EN 1149-2 Technical parameters Technical Index HD-G828 Test range 1x10^3 Ω～1x10^14 Ω Accuracy ≤±5％ Test voltage DC100V±3％ Working power ...

... used for the impact resistance test of the safety shoes toe head. Use the electromagnet to control the drop of hammer and drop from the set height. Check the damage or deformation of ...

... shoes through 100J or 200J power, then observe the sinkage to value its quality. The design is different among EN, ANSI, BS, CSA, so please prescribe the regulation when ordering. Specifications: Drop hammer Weight: (EN)20±0.2KG, (BS,ANSI)22.7KG Height:

...Testing Machine , Standard Safety Footwear Impact Testing Equipment Specifications 1,Meet standard of EN, ANSI, BS, CSA 2,Use friendly &easy operation 3,Motorised lift of the striker mechanism 4,Short delivry Description: EN, ANSI, BS, CSA Standard Safety Footwear Impact Testing Machine can be used for a variety of impact (drop) tests with the appropriate anvils and strikers. It is ideal for testing to the safety footwear

...En Whole Sole Flexing Testing Equipment( GW-005B) •Brief introduction: This machine is used to determine the resistance of materials to cut growth during repeated flexing. It is especially applicable to outsoles of footwear including sole constructions. •Technical Specifications: Modcl GW-005B EN Whole sole flexing testing...

Electronic Shoes Material Compression Spring Leather Testing Instrument Usage: Shoes Material Compression and Puncture Testing machine is special to test the compression and the puncture of the safety footwear. The test result can help manufacture to ...

Footwear Testing Equipment Water Vapor Permeability Tester for vamp Product Introduction Water Vapor Permeability Tester is used to determine the water vapor permeability for vamp and upper shoe materials. Using in the conditioning room under the standard stipulated temperature (23 ± 2)℃ and humidity (50 ± 5)% RH. Standards: EN ISO 20344 Section 6.6.2, AS/NZS 2210.2 Section 6.6.2 GB/T 20991 Section 6.6.2 , EN...

...Testing Machine Utm Tensile Test Tensile Testing Machine.pdf Standard: ISO7500/1, ASTM D638, ASTM D412, JIS B7721, JIS B7733, EN 1002-3, BS 1610,ISO13997:1999,ISO139352,ASTM D2261 Application Industry: Widely used in wire and cable, hardware, footwear, electronic appliances, packaging and printing, medical equipment, auto parts, textile and leather, clothing and footwear...