Sign In | Join Free | My wneducation.com
wneducation.com
Products
Search by Category
Home > Electronic Signs >

4.3 Inch 800x480 TFT Lcd Monitor Pcap Monitor TFT LCD Display Manufacturer

Categories 2.9"~4.9" TFT display
Brand Name: HOTHMI
Model Number: TFT-H043A12SVILT4C40
Place of Origin: dongguan,China
Product Type: TFT Landscape
Dimensions (mm): 105.5x67.2x2.95
Viewport Window Size: 4.3"
Product Application: Instrumentation
Backlight type or brightness: 400cd/m2
Special Instructions: with CTP
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
Submit Buying Request
  • Product Details
  • Company Profile

4.3 Inch 800x480 TFT Lcd Monitor Pcap Monitor TFT LCD Display Manufacturer

4.3 Inch Projected Capacitive Touch Screen Module/800x480 Dots/TFT-H043A12SVILT4C40


Product parameters


Display Content - 800x480
Display Size - 4.3"
Effective size (mm) - 95.040x53.856
Perspective - Full Perspective
Connection method PIN number - FPC-40PIN
Interface - MCU 8/16 Bit
Operating temperature - (-20~70℃)
Supply Voltage - 3.3V
Driver IC Model - ST7262


General Feature:


ItemStandard ValueUnit
Display Size4.3Inch
Number of Pixels800(H)*3(RGB)* 480(V)dots
Active Area95.040(H)* 53.856(V)mm
Outline Dimension

105.42(H) * 67.07(V) * 4.70(D) <TFT+CTP>

mm
Viewing DirectionFull O'clock-
TFT InterfaceMCU 8 bit/SPI/I2C-
TFT Driver ICST7262+HT7381-
TFT Driver ConditionVCI=3.3V(Typ)V
Backlight-1White LED/10 PCS/5 LEDs in series, 2 in parallel-
Touch PanelWith CTP-
CTP Driver ICGT911-
CTP Driver ConditionVDD=3.3V(Typ)V
Operation Temperature-30 ~ 80
Storage Temperature-30 ~ 85

TFT Pin Description


Pin NO.SymbolDescription
1~2LEDKLED Cathode
3~4LEDALED Anode
5~6GNDGround
7~8VCIDigital Power
9~11PSM[2~0]MCU interface settings.

12


RESX

Reset input signal

When RESX = 0 and maintain the length of 256 clock cycles, chip will generate a reset action.


13


CS

Chip select signal.

If the MCU interface is set to the serial mode, this pin can be set to GPIB [0], internal pull-up resistor.


14


RD

Read control signals.

In parallel mode of 8080, this pin is RD# signal, RD#=0, which means MCU reads data or status read cycle to the chip.

In the 6800 parallel mode, this pin is the EN signal, EN=1, indicating that the MCU's control of the chip is in the enable cycle.

If the MCU interface is set to serial mode, this pin can be set to GPIB[1] with an internal pull-up resistor.


15


WR

write control signal

In 8080 parallel port mode, this pin is the WR# signal, WR#

= 0, representing the MCU A command write or data write cycle is performed on the chip.

In 6800 parallel port mode, this pin is RW# signal, RW# = 1, representing MCU Data read or status read cycle is performed on the chip. RW# = 0, representing The MCU performs a command write or data write cycle to the chip.

If the MCU interface is set to serial mode, this pin can be set to GPIB[2],There are internal pull-up resistors.


16


RS/A0

command or data select signal

A0 = 0, which means that the MCU reads the status of the chip or the command write cycle.

A0 = 1, which means the MCU reads or writes data to the chip.


17


WAIT

waiting for output signal

When the MCU reads and writes the chip, if the chip is busy, it turns WAIT into a low level to notify the MCU to enter the waiting period.


18~25


DB[0~7]

  • MCU data bus
  • If set to serial port mode, these data buses will be used as serial port signals. Please refer to Table 3-2 "MCU serial port signal" description.
26~33NCNot Connect

34


INT

Interrupt output signal

When the set interrupt condition occurs, this pin becomes a low level, which is used to generate an interrupt output to inform the MCU.

35NCNot Connect
36GNDGround
37RTP_XRResistive TP function pin,If not used, let this pin open.
38RTP_YDResistive TP function pin,If not used, let this pin open.
39RTP_XLResistive TP function pin,If not used, let this pin open.
40RTP_YUResistive TP function pin,If not used, let this pin open.

CTP Pin Description


Pin NO.SymbolDescription
1RTNCTP Reset signal
2VDDCTP Power supply.
3GNDGround
4INTCTP interrupt read signal
5SDACTP IIC data signal
6SCLCTP IIC clock signal

Describe
The H043A12SVILT4C40 TFT LCD module is a 4.3-inch diagonal, 800xRGBx480, full-color TFT module with a projected capacitive touchscreen on the module, with an external dimension of 105.42 × 67.07 mm and an AA dimension of 95.04 × 53.856 mm. This 4.3" TFT LCD with projected capacitive touch screen can be used in embedded systems, industrial equipment, security and handheld devices that need to display high quality and color images.

TFT-H043A12SVILT4C40.pdf

Quality 4.3 Inch 800x480 TFT Lcd Monitor Pcap Monitor TFT LCD Display Manufacturer for sale
Send your message to this supplier
 
*From:
*To: Hotdisplay Technology Co.Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0