High Precision Aerospace Machined Parts Custom Cnc Machined Components

High Precision Aerospace Machined Parts Custom Cnc Machined Components

4 Aixs High Precision Aluminum High Aerospace Defense Industry Parts Components Custom

CNC Machining Parts diameterØ150mm,Concentricity=0.03mm

Metal:Titanium TC4,TA9,TW340,AL2012,AL2A12,AL6082,AL6061,AL7075,SUS303,SUS304,30CrMn.
Machine:CNC machinging center,CNC lathe,Wire cutting macine,Milling machine,Grinding machine,EDM.
Surface treatment:sand blast,,anodizing,Engraving,Gold plating.
Purpose:unmanned aerial vehicle,drone, UAV,UUV,Aerospace,Defense,Aircraft,guided missile,Submarine,

Navigation, military.

Main Machining Machinery Display

Main Products Display

Processing all kinds of metal and plastic matenrials with the change of the times,the materials chosen by

customers are changing constantly,in order to meet the different material needs of customers,we have

accumulated a very rich and wide range of process characteristics and technical know-how of mechanical

processing of metal and non-metal materials through continuous technological innovation and research

and development.

Production Capabilities Minimum Tolerance

Outer diameter dimension(turning Process) 0.01mm

Outer diameter dimension(centerless grinding process) 0.005mm

Outer diameter dimension(step grinding process) 0.005mm

Internal diameter dimension(turning process) 0.01mm

Center distance dimension( CNC milling process) 0.01mm

length,width,high(cnc milling process) 0.01mm

surface roughness Ra0.2a

Run-out 0.01mm

Roundness 0.01mm

Flatness 0.01mm

perpendicular 0.01mm

Cylindricity 0.01mm

Why are you choose us ?

1. Rich CNC machining experience.

XINYA was founded in 2008years, having a long history of 10 years.Full experience accumulated in

Precision CNC machining service on best quality for medical, communications, photoelectric,

auto parts processing,CNC Precision machining. Mechanical processing - heat treatment - surface

treatment and assembly, we are committed to offer you and one-stop solution .

2. We have do business with many foreign customers from Europe/North America/Aisa etc areas,

like we have cooperation with GE and SUMITOMO,CANON for around 10years. No matter how much

the production is, we will take it seriously and do our best.

3. We have had 60 sets machining,including CNC automatic lathes imported from Japan, So this will

help our company have bigger manufacturing capacity.To meet more customers' precision request,

we have CMM, PROJECTOR etc.Precision inspection instruments to measuring our products.

In order to ensure quality, we carry out strict first sample inspection, process inspection, shipment

inspection, and every process is strictly checked. We try every means to prevent defective products

from flowing into the next process and customer place.

4. We offer OEM/ODM service with reasonable production techniques for customers to cut down the cost.

Our engineering team use the UG/PROE/SOLIDWORKS/MASTER etc software to support our production

techniques.

5. Overseas logistics experience, FOB, CIF, DAP and other trade terms.

It is our goal to meet our customers’ expectation through good quality,fast delivery service, productivity and

Continuous improvement.Shenzhen Xinya Precsion machining Co., Ltd is to be your best choice

and long-term partner.

FAQ:

Q1:Are you a manufacturer?

A1:Yes, we are a medium size ISO9001 certificated manufacturer with a wide range of advanced

equipment.Warmly welcome to visit our factory so that you can make sure this point.

Q2:What is the MOQ?

A2:Minimum Order Quantity is one piece/set.If you require more qty,the price can be more competitive.

Q3:Can you do the mass production?

A3:Yes,we are a factory which can provide service of precision CNC machining, rapid prototyping,

wire cutting, tooling building and etc.After you confirm the samples, we can start mass production.

It is very convienient for customers to

Choose us as a one-stop solution supplier.

Q4:Which 3D drawing files should go with the machines?

A4:CNC machines only read *IGS,*STP,*STEP,*IGES,*X-T format, for *STL format,it goes with 3D

printer and SLA.

Q5:Is it possible to know how are my products going on without visiting your company?

A5:We will offer a detailed production schedule and send weekly reports with pictures or videos

which show the machining progress.

Q6:Will my drawings be safe after sending to you?

A6:Yes, we will keep them well and not release to third party without your permission.

Q7:What shall we do if we do not have drawings?

A7:Please send your sample to our factory,then we can copy or provide you better solutions.

Please send us pictures or drafts with dimensions(Length,Hight,Width),CAD or 3D file will be

made for you if placed order.

Quality policy

Customer's requirement is our standard. In the long-term production process, we have

established a perfect quality management system, so that product quality can be controlled

steadily in the manufacturing process. We strictly enforce the operation rules and quality

standards from the aspects of material purchasing, R&D and design, process flow and

quality inspection, all of which originate from our unremitting pursuit of quality.

We can't give you the lowest price, we can only give you good quality. We would rather

explain the price to you for a while than apologize for the quality for a lifetime. If we only

want to pursue profits, we can achieve the goal of fast sales by reducing costs. But we think

that only perfect quality is our pride, in order to promise that we will not be proud of

short-term benefits. Selling the future, our efforts and persistence are recognized and

followed by more and more customers, which is the greatest driving force for us to continue

to move forward. We can not thank you, but only report quality.

Quality Inspection Links and Inspection Items		Introduction of Various Quality Testing Instruments
1.Inspection of raw materials		3CMM
IQC Inspectors will inspect surface,size and matcertificate provided of materials.		CMM can be defined as "a detector which can move in three directions.

▼ ▼

2.First sample inspection		3CMM
Technicians and quality personnel will carry out self-inspection of the first sample, Batch production can not begin until the full size is qualified		Meanwhile length, width,height, verticality, parallelism, cylindricity and contour accuracy can be measured.

▼ ▼

3.Process Inspection & Circuit Inspection		2.5CMM
IPQC-checked regularly After start of mass production, we can find out influence of mechanical equipment changes and tool wear on size in time.		Usually takes the image into the computer through CCD for measurement and calculation.

▼ ▼

4.Air tightness check, water pressure check		High Altimeterr
If you have assembled parts of product and required to inspect withstand pressure and leak inspection, we can do it.		High Altimeter (also known as altimeter) is used to measure the height of space points relative to the ground.

▼ ▼

5.Final Inspection of Manufacturing Process		Micrometer	Calipers
FQC is abnormal, it will be considered there is a quality problem between the inspection tour to final product. the FQC is an important link to ensure quality.

▼ ▼

6.Full inspection of appearance and key dimensions		Comparator	Inner diameter micrometer
All finished products will be inspected for scratches, bruises, debris, threads, burrs and other appearance problems.

▼ ▼

7.Over Quantity Check		Pin gauge,block gaugeT	hread gauge, pass gauge
OQC will carry out strict inspection according to drawings and quantity order. This inspection is also the last defensive wall to prevent the flow of defective products.

▼ ▼

8. Fill in the quality inspection report		Material Sheet	Quality inspection report
The results of actual measurement are collated and the quality inspection report is made. Delivery with goods to customers.

▼ ▼

9. Packing		Rohs report	MSDS Sheet
Finally, it is packed into special cartons or composite boxes to arrange related logistics and transportation

Our measuring equipment:
CMM
Projector
Concentricity measurement
Hardness tester
Thread Ring Gauges
Pin Gauges
Micrometer
Vernier Caliper
Roughness machine
Our precision machined components are implemented of ISO9001:2015,combined with

our in-house quality control system and these measuring equipments,ensure problem-free

products.

       With the rapid development of global economy, competition and challenges in various fields have become inevitable. We  are adhering to the firm spirit of enterprise and constantly pursue innovation, and are brave enough to face and overcome all kinds of severe test. My team is consistently innovating and developing our capability to align and meet ever-changing market dynamics and technology advancement, in providing efficient supply-chain &cost efficiency to our customers for their end-users.We strongly believe in creating“win-win”synergy with our customers to build a long-term strategic partnership for mutual growth.                       

         WINHOO group is located in shenzhen City, Guangdong Province China, adjacentto the Guangshen high speed, thegeographical position is superior,the traffic is convenient. Is a collection development, design, manufacturing, sales and service in one of the precision parts, fixture, non-standard equipment for the main manufacturers, the existing staff of more than 100 people, including senior engineer 8 people, more than 10 quality inspection. Products are widely used in machinery, medical, robot, optical communication,unmanned aerial vehicle,3D printing,laser machine,mold,Solar power , electronic and other industries.     

        With the expansion of the expansion of the market and the production scale, As with the market development needs and promote the enterprise technology innovation and upgrade, we have introduced the advanced production equipment. For example: high-speed vertical machining center of taiwan huaqun, CNC lathe of Japan tsugami, Switzerland croma three dimensional measurement instrument, the Swiss TESA digital display  height instrument.To focus on "customer satisfaction" as the premise condition of core business tenet, company personnel to promote lean production management mode.                                        

     With the evolution and development of precision metal parts manufacturing industry chain,   we recognized that the industrial chain of enterprise survival based on quality and product services to guests. To this end, we continue to introduce foreign high-precision processing and testing equipment; product process simple optimizing continuously; constantly improve product quality standards and other aspects of enterprise management innovation, the company has won high praise and affirmation from customers.

     The company always adhere to the " quality first, to meet customer requirements; continue improvement, to achieve sustainable development”approach to quality and“Honest Cooperation; Endless Striving for Excellence”approach to corporate culture，and strive to provide high-quality products and services at home and abroad.   

WHY CHOOSE US 

 1. Rich CNC machining experience. WINHOO was founded in 2008 years, having a long history of nearly 15 years.   Full experience accumulated in Precision CNC machining service on best quality for medical, communications, photoelectric, auto parts processing,CNC Precision machining.     

2. We have do business with many foreign customers from Europe/North America/Aisa etc areas, like we have cooperation with GE and SUMITOMO,CANON for around 10years.     

3. is certified to the latest international quality management system, ISO 9001:2015. Under this certification, Ardel is able to offer its customers total control of material and processes. With the latest CMM and other measurement instrumentation,  

4. On 2022, we have had 60 sets machining,including CNC automatic lathes imported from Japan, So this will help our company have bigger manufacturing capacity. To meet more customers' precision request, we have CMM, PROJECTOR etc. Precision inspection instruments to measuring our products.       

5. We offer OEM/ODM service with reasonable production techniques for customers to cut down the cost. Our engineering team use the UG/SOLIDWORKS/MASTER etc software to support our production techniques.                                                             

It is our goal to meet our customers’ expectation through good quality, fast delivery service, productivity and continuous improvement. Hongkong winhoo Precsion machining parts Co., Ltd is to be your best choice and long-term partner.

the employees of Winhoo Precision appreciate the time you're taking to visit our website,and we hope that you will give us the opportunity to serve you.