Custom HT1621 DP1621 VK1621 7 Segment COB SPI Interface Meter Stretched Bar Touch LCD Display Screen Module

China LCD Manufacturer Customized Segment COB HT1621 DP1621 IC SPI MUC Interface LCD Display Screen Module

Compatible with HT1621, DP1621 is a dot matrix memory mapping LCD driver chip, which can support LCD screens up to 128 points (32SEG*4COM), as well as LCD screens with 2COM and 3COM. The single-chip microcomputer can configure the display parameters and send the display data through 3/4 communication pins, and can also enter the power-saving mode through the command.

DP1621 chip features

◆ Compatible with alternative HT1621B

◆ Built-in 256KHz RC oscillator

◆ It can be connected to 32KHz chip or 256KHz frequency source input

◆ 1/2 or 1/3 bias and 1/2, 1/3 or 1/4 duty cycle can be selected

◆ Working voltage: 2.4~ 5.2V

◆ On-chip time-based frequency source

◆ The buzzer can choose two frequencies

◆ Power saving command can be used to reduce power consumption

◆ Built-in timebase generator and watchdog timer (WDT)

◆ Time base or watchdog timer overflow output

◆ Eight time-base/watchdog timer clock sources

◆ 1 x 32x4 LCD driver

◆ 1 embedded 32x4-bit display RAM memory

◆ Four-wire serial interface

◆ On-chip LCD drive frequency source

◆ Software configuration features

◆ Data mode and command mode commands

◆ Three data access modes

◆ VLCD pins are provided for adjusting the LCD operating voltage

◆ Package: LQFP44/LQFP48/SSOP48

China LCD Manufacturer Customized Segment COB HT1621 DP1621 IC SPI MUC Interface LCD Display Screen Module Product Images

Facilities and Strategic Customers

Why Choose us

1．We provide LCD Display custom solution

Does your product have special application requirements, electrical specifications, optical specifications, touch features, or mechanical dimensions that require customized displays? SAEF can meet your custom LCD requirements.

2．Total solutions for Touch screen and display

Are you worried about assembling the touch screen and display screen? SAEF can provide custom and standard touch screen including Resistive and Capacitive multi-touch solutions including air & optical bonding service as well.

3．Commitment to quality reliability

SAEF is Qualified by ISO9001:2015 and ISO14000, meeting the RoHS, REACH and other environmental rules in global markets. We ensure quality through the manufacturing IQC,PQC and OQC management, reliability and aging testing.

4．Long-term supply

Under normal circumstances, the products we recommend can be supplied for more than 5 years. If there are special needs, we will make alternative plans in advance to ensure your long-term supply requirements.

Contact

Welcome to inquire via ck@saef.com.cn

Search Keywords: TN LCD, VA LCD, VATN LCD, HTN LCD, STN LCD, FSTN LCD, EBTN LCD, temperature and humidity meters LCD, electronic scales LCD, multimeter LCD, smart meter LCD, water meter LCD, gas meter LCD, bank money counter LCD, cash register LCD, stock machines LCD, telephone LCD, walkie-talkie LCD, massager LCD, treadmill LCD, fat meter LCD, air conditioner LCD, Audio LCD. Car DVD LCD, microwave oven LCD. remote controler LCD, learning machine LCD, electronic dictionary LCD, MP3 LCD, computer, control LCD panel , CNC refueling machine LCD, industrial computer LCD, game console LCD, perpetual calendar LCD, clock LCD. Instrumentation LCD. Healthcare machine LCD, Thermostat LCD, Home Appliance LCD, Elevator LCD, LCD for Lift.

Segment LCD programming skills

First, the basic parameters of segmented liquid crystal
1.Duty: duty cycle
This parameter is also generally called the number of Duty or the number of com, and the segment liquid crystal generally adopts the driving mode of time-division dynamic scanning, in this mode, the ratio of the effective gating time of each com to the entire scanning cycle, that is, the duty cycle, is fixed, equal to the number of 1/com.

2.Bias: Bias
The driving waveform of the LCD'S SEG/COM is an analog signal, and the ratio of the analog voltage of each level to the highest output voltage of the LCD is called bias, and generally speaking, Bias is expressed as the ratio of the lowest voltage to the highest output voltage. Generally speaking, there is a certain relationship between bias and duty, the more the number of duties, the shorter the scanning time corresponding to each com, and to achieve the same display brightness and display contrast, the voltage of von should be increased, and the difference between the selective level and the non-selective level needs to be increased, that is, Bias needs to be increased, and there is an empirical formula between Duty and Bias, namely:
Bias = 1/(√Duty + 1)

3. VDD: working voltage
Liquid crystal molecules need AC signals to drive, and long-term DC voltage added to both ends of liquid crystal molecules will affect the electrochemical characteristics of liquid crystal molecules, causing blurred display, reduced lifespan, and irreversible destructiveness.

4.Frame: Scan frame rate
Scanning frequency, the frequency of the AC voltage that directly drives the liquid crystal molecule is generally between 60~100Hz, which is determined according to the area and design of the LCDPanel, the frequency is too high, which will lead to the increase of driving power consumption, and the frequency is too low, which will cause the display to flicker, and if there is an integer multiple relationship between the scanning frequency and the frequency of the light source, the display will also have flickering.

Other things such as viewing angle, connection method, operating temperature range, etc., then let the supplier do it according to the specific needs;

As for how to control the segment code screen display, some MCUs such as MSP4304152 support segment code driver, if not, you can use a special driver IC such as HT1621B/HT1622, etc., after the driver is done, it is nothing more than writing data, and each data bit controls the corresponding segment code display or not;
The principle is the same, but using some C language skills will make the program more concise and efficient;

Founded in 2007, ShenZhen SAEF Technology Co., Ltd is committed to manufacturing and developing high-quality products for industrial LCD display, including TFT LCD, OLED, monochrome TN/STN/FSTN LCM display modules and system integration solutions. Saef Technology has become a leading enterprise in the field of small and medium size displays, and its continuous innovation has enable it to obtain a number of invention patents in the display field. With more than 14 years of experience, providing competitive products and services through stable product quality and professional pre-sales and after-sales service, SAEF technology has won the recognition of many international big brand companies and established long-term and stable cooperation with them.

Saef Technology is an ISO9001 and environmental ISO 14001 certified manufacturer. We provide 1 to 10 years warranty for all the company’s products. We are not only a display manufacturer but also a solution partner for our customers.

As a leading manufacturer in the display module market, Saef Technology will continue to focus on the research and development of new technologies such as TFT, OLED display, embedded systems integration solutions, and we will continue to provide customers display products with high cost performance.