Computerized Flat Knitting Machine FX2-52S

Model

FX2-52S(Sinker type)(Japanese Avail operating system)

Segment bed

52"(132cm),Replaceable Segment

Knitting width

Maximum52"(132cm)

Needle
Gauge

5.6.7.8.10.12.14 per inch

Speed

Knitting speed varies according to gauge and knittingcondition.MAX.1.2m/sec..24speed selection
programmable command control.

Compact

Compound knitting cam system, each system can execute knit,
tuck and miss 3 technique at the same time.

Transfer

Compound knitting cam system.each system can transfer
from the front to rear, rear to front or both front and rear simultaneously
without direction restriction. Auto racking and auto receiving.

Stitch cam

Each stitch setting is controlled by a step motor .It has 24 stitches of
independent selections and each of them ranges from 00-180 steps
for knitting pattern.

Needle selection

Each system has 4 sets special solenoids. Double cam system equipped
totally 8 sets solenoids, which can be installed or removed simply from the
carriage and maintained easily.

Yarn carriers

2*8 sets yarn carriers on 4 double side rails.switchable ib any area within
the knitting width. Also can be equipped with special design yarn carrier for
intarsia pattern(Option device).

Movable sinker

This system composed by two additional pieces of sinker needle bed. The
sinker presser degree adjustable the positions by knitting program command.(FX2-52S)

Racking AC

Servo motor control.the programmable racking positions within 2 inches.each also having 1/4.
1/2and 3/4 micro adjust able positions.

Main take down

24 levels changeable tensions, adjustable automatically on each level.

Sub take down

24 levels changeable tensions, adjustable automatically on each level. Automatic open and close.

Carriage drive

AC servo motor control.tooth shape driving belt.no oil needed.24 speed selection and freely
programmable.

Stop motion

Yarn breaking.knot.press off.needle break.over current.roll back.wrong racking.
inappropriate position of presser.excessive yarn.and reaching on production target offer
automatic stop.

Memory capacity

1024×4096 hung memory for the width and pattern length design.

Language

CRT indication English and Chinese are standard version. Supplement with other
languages(Option software)

Power

AC3 phase 220v.electricity consumption 2.4KVA.