CNC cutting machine is a kind of equipment which dedicated to a
variety of carbon steel, stainless steel, aluminum, copper and
other metal materials. The equipment in the industrial computer
control, adopt high-temperature plasma arc or flame cutting on the
plate can be cut in any graphics and text, it is widely used in
shipbuilding, pressure vessel manufacturing, machinery
manufacturing, steel processing industries.
When using a plasma arc cutting, not only can cut carbon steel, but
also cutting stainless steel, aluminum, copper and other metal
materials, maximum cutting thickness determined by the plasma
source with the decision. Normally, the device used by the U.S. sea
treasure produced plasma power, plasma cutting speed relative to
the oxyacetylene cutting speed, high efficiency, effectively reduce
the overall cost.
When using oxyacetylene or other oxyfuel, only cutting carbon
steel, cutting thickness 6 ~ 200mm, such as the use of special
cutting torch, cutting nozzle and specialty gases, gas, maximum
cutting thickness up to 300mm. Oxyfuel cutting, plasma cutting with
respect to the slow, but a thick steel plate can be cut, and the
use of low cost.
The device mechanical structure gantry form, from the main end
beam, secondary-side beams, and beams composed of portal frame,
driven by AC servo motor,walking on the rails. CNC cutting trolley
through the slider fixed to the beam front, driven by a servo
motor, through the gear rack drive, walk by the linear guides.
The device is also equipped with automatic torch height adjustment
device and automatic arc ignition device, the use of automatic
nesting software programming, enabling automatic control of the
Equipment used graphics file programming language international
common CNC Programming Language - G code language. G-code file can
be edited manually, or use the device supporting FASTCAM automatic
nesting software programming or other programming software for
automatic programming and nesting, easy programming, sheet
1. The machine body
It is gantry type structure. The cross beams treated by whole
annealing to eliminate stress so it has good rigidity and high
strength without permanent deformation.
2. The vertical rails
The vertical guide track adopts heavy rails. The surface has high
precision after grinding . The rail length can be increased and
decreased according to the requirements of users;Rails using 38Kg /
m rail processed from the top surface and the side after grinding
with high straightness and parallelism; foundation generally use
concrete structure ( also available in steel )
3. The cutting torch holder
The cutting torch holder adopts the collision-preventing design to
ensure the cutting torches are not damaged in production.
4. The horizontal rails
The horizontal guide track adopts a straight line track with high
precision and smooth running.
5. The travel reducer
The travel reducer adopts German high precision planet gear
6. The driven system
The driven device adopts the full-digital AC servo system and motor
made by Japan Panasonic which has high running precision.
7. Regulator of auto height regulator
The machine has many functions such as automatic position,
automatic perforation, and automatic height-regulating device of
capacitance. The plasma cutting machine is equipped with USA
imported arc voltage height-regulating device.
8. Program and nesting software
FastCam from Australia
9. CNC system
It is equipped with famous brand USA START Control system
10. The track gauge
The machine with below 4m gauge adopts single side driven, the
machine with above 4m gauge adopts double-side driven to guarantee
its precision an high speed smooth running.
11. Cutting power
USA Hypertherm (USA Cut-master optional)
|Cross Beam width||2500mm(Can be widen according to user's demand)|
|Longitudinal Rail Length||8000mm(Can be lengthened according to user's demand)|
|Effective Cutting Width (X axis)||2000mm|
|Effective Cutting Length (Y axis)||6000mm(Rail can be lengthened according to user's demand)|
|Cutting Mode||Flame &Plasma|
|Drive Method||Rack and pinion drive for X and Y axes|
|Flame Cutting Thickness||6-180mm|
|Plasma Cutting Thickness||0.3--25mm( Depends on plasma power source capacity)|
|Power source supply||huayuan 60A/100A/120A/200A|
|Power Source||380V 50/60Hz|
|Power capacity||25-50KW according to different power source|
|Plasma Gas||Pressed air,Oxygen,N2|
|Torch Height Controller (AUTO)||US-START(Arc voltage height control for plasma cutting)|