Categories | Flooring Installation Tools |
---|---|
Model Number: | 202280/202300 |
Place of Origin: | CHINA |
MOQ: | 10 sets |
Price: | negotiated price |
Payment Terms: | L/C, T/T, Western Union, MoneyGram |
Supply Ability: | 10000 sets per month |
Delivery Time: | about 5 work days |
after-sales service: | Online support |
Heavy Sanding Machine 202280/202300
High efficiency: the best grinding effect, high efficiency;
Multi-purpose: grinding, grinding, cleaning, rust removal;
Consumables: large tool contact area, stable, consumables versatility;
Multi-function design: according to the surface light different, our design of the grinding disc is multi-function, can be installed a variety of grinding head, to adapt to a variety of different ground grinding, disassembly is convenient;
Environmental protection: integrated with dust absorption, dust-free construction;
Consumables: diamond grinding disc, sandpaper;
Convenient: small submission, removable handrail, easy to transport.
Model | Motor KW | Duster Power KW | Rotate speed R/MIN | grinding head | Working width MM | Working depth MM | Weight KG | power supply; |
202280 | 2. 2 | / | 800 | 3 | 280 | 0-0.5 | 80 | 380V |
202300 | 4 | 1.1 | 800 | 3 | 300 | 0-0.5 | 114 | 380V |
Operation instruction:
1. Check the tightness of the belt before use, otherwise the belt will be seriously damaged. Belt inspection method: remove the belt cover, if it too loose, remove ash box, press the handle to chassis cock, remove the knife dish, loosen the chassis nut (4 M12 lock nut, with 19 wrench), adjust the counterweight iron side of long screw belt release to the right position, locking plate nut, mount the knife dish, and then install the belt cover.
2. Connect power. Press the handle hard to lift up the chassis, turn on the switch and power switch, then the machine starts running.
3. After the machine is running, push forward slowly to make it touch the grinding area.
4. In case of any abnormal situation in the operation, please turn off the power and make the machine stop running.
5. Turn off the power and open the upper and lower storehouses of the vacuum cleaner after the works for 30 minutes, and clean the dust inside the storehouse and filter screen.
6. Stop the machine before replacing the grinding head. First remove the cutter head (loosen M8 socket screws, do not remove the large socket screws in the middle of the cutter head). The replacement method of the sand disc is the same.
7. After the machine is finished work, turn off the power switch and the vacuum cleaner switch.
Maintenance instructions:
1. Clean the dust in time to avoid clogging after each stop.
2. Before the work must carefully check the belt tightness, if there is loose please timely adjustment, must make the belt running on the machine in the state of tension.
3. Add lubricating oil or butter to all the activity points on the machine.
Note:
1. When operation for the first time, if you are not familiar with the construction of the product, the consumables may wear out a lot. As you get it, the consumables will be saved.
2. It is a normal phenomenon that the loss of consumables varies greatly due to different construction place, cement labels and sand grains.
Operators must wear insulating gloves and labor shoes
Friendly Links: www.everychina.com
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们