500L 1000L 1500L ss304 316L stainless steel mixing tank 2 double
layer for chocolate
It is used for mixing all kinds of liquid products in
pharmaceutical, food, chemial and biological
fields.We have different kinds of agitators:
1-Bottom magnetic agitator with propeller impeller, speed from
50-400rpm or 50-800rpm. this
kind of agitator is mixing thin viscosity , such as eyedrop,
injection, CIP liquid, water, etc...
2-Top mechancial agitator with propeller impeller, speed at fix
71rpm or adjustable 20-200rpm
or special requirement. this kind of agitator is mixing syrup,
injection, blood, oral liquid, culture media,
3-Tank bottom emulsifier, speed max 2900rpm for small vessel,
1480rpm for bigger tank. this
kind of agitator is mixing most high viscosity , such as
suspension, oil, lotions ,fat emulsification , etc....
1.Mixing oil and water phases materials in high speed to get
perfect emulsion product of good quality.
2.Machine consists of vacuum-resistant vessel with jacket for
heating and cooling. Equipped with high speed homogenizer, scraping
agitator, vacuum pump, and hydraulic pump for lifting, heating
& cooling system.
3.With vacuum pump to take the air bubbles out of mixed product,
and extend the time of storage.
4.Scraping unit is with moveable teflon scrapers to scrape off the
materials on the tank wall and the anchor to move the materials to
the center area to get better blending and mixing. The teflon
scrapers are maintained manually and easily without any tool.
5.Our vacuum emulsifying equipment equipped with heating &
cooling system which simplifies the processing. Within this same
equipment, you can do from heating-melting-emulsifying-air bubble
reduction(by vacuum)-cooling without changing vessels, it saves lot
of labor and time for your production.
6.All contacted parts of equipments are SUS316L,the product
homogenized in vacuum and close vessel can be sanitary and high
7.The measuring of raw materials, the recording of temperature for
heating, melting, emulsifying, cooling, and the change of mixing
speed, and the vacuum suction can be controlled.
Juices Food & Beverage sugar ,salt ,ingredient mixing
Pharmaceutical Biotechnology ‘s raw material mixing ,liquid mixing
Laboratory Medical &Medical Device Chemical Industry Painting
Diameter of Inlet
& Outlet (mm)
900 x 800
35 -150 Rpm
1100 x 1200
1300 x 1500
1600 x 2000
1700 x 2200
1700 x 2600
1. It can be made according to special requirements of customers.
Total Height is in accordance with
outlet height of 300mm. If outlet height is changed, Then the total
height shall also be changed!
2. The Power of Motor shall be changed according to the Viscosity
of material In the tank!
Advantage for liquid making machine
1. Completely Meet GMP
2. Using Japan NSK bearings
3. Material contact part all use SUS316L
4. Safety protecting functions, make the produce saver
5. Homogenizer's design mainly stem from Japanese technology.
6. Siemens Inverter, power-saving, machine-protect, keeping the
machine working stably
Stirring scrap and middle stirring rotating the opposite direction
make the mixing more equally
7. Burgmamn mechanical seal, seal good, long working life, keep the
homogenizer work 24 hours continually.
8. Slow stirring axle adopts 2 sets of mechanical seal and 2 sets
frame oil seal, make the seal saver.
9. Install a fall buffer unit on the hydro-cylinder in the
hydraulic system; keep the cover up and down stable
Jhenten is a professional manufacturer of tank equipment more than
Jhenten can produce cartridge filter housing ,bag filter housing
,water filter housing ,industrial filter housing ,high
flow filter housing etc
Currently Jhenten already obtained CE,ISO9001 ,D1 D2 pressure
vessel fabricate certificate and we also are the
stable supplier of Veolia ,SIEMENS ,IWAI ,SPX , Mitsubishi
Transport & packaging