Roll Feeder the exact length of metal (MS,Brass Copper and any
material strips) of 0.0 mm to 2mm thickness & maximum width of
300 mm to Power press for various type of die stamping &
progressIve tooling. Feeder normally feeding is 3mm.to 80mm.
Machine Feed Accuracy
Depends on feed length of stock and stroke of press, the general
accuracy Is within +/-0. 05mm, and can be better up to +/-0. 01mm
by pilot Pin with automatic stop system. The Mechanical Feeder is a
state of art technology with proper guides to glide metal strips
according to requirement.Press machine Mechanical Roll Feeder
Mechanism Feature One way clutch Made of Harder steel on the
contacting surface to keep rigidity, precision and durability. The
gear is hardened to HRC 60°and ground to the best transmission
High feed accuracy at exact positioning with heat treated to HRC
60° and ground for the best rigidity and durability.Disk Brake
Apply the best brake lining to have accuracy, durability, and
rigidity. (High speed feeder only)The Anti-reversing Device
- The structure is same as the one way clutch. It can precisely
control the lower roller which will not reverse even for long time
used as it is high in stability and precison.
- The brakes will not out of control by the spalashed waste oil when
it is punching such cause the lower roller to revere, and transfer
- It will not cause high heat.
- Super hard alloy and rolling post have used. They are not easy to
As per your requirement What We give you !
- 100mm to 300mm feeder.
- Feeding length 3mm to 300mm.
- Pilot relies system
- Edge guide in built feeder table (bracket) & maintenance free